Alpha Imports
Air Suspension Blowers
Air Foil Bearing Turbo Blower
A perfect blend of aerospace-grade air foil bearings, high-speed permanent magnet synchronous motors and precision ternary flow impellers. Integrated compact design, no gearbox and coupling, no lubrication system required. Providing you with efficient, clean and low noise aerodynamic solutions.
Air Foil Bearing Principle
The heart of an air suspension blower is its bearing system. The viscous force of the air brought in by the high speed rotation of the rotor is utilized to form a high pressure film of air between the rotor and the foil, which “lifts” the rotor.
Start-stop phase (contact)
At lower speeds, the rotor is in contact with the Teflon coated top foil. Due to the lubrication of the coating, friction is minimal.
Acceleration phase (dynamic pressure building)
As the speed increases, air is brought into the gap. The wave foil deforms elastically and the air film pressure begins to build up.
High-speed operation (full suspension)
High pressure air film completely lifts the rotor after speed exceeds 3000 RPM. The 100% achieves non-contact operation with zero wear.
Three core technologies
Optimized system energy efficiency through integrated design
High-efficiency ternary flow impeller
Made of AL7075 aerospace aluminum, precision manufactured by 5-axis machining center. Aerodynamically optimized ternary flow pattern with an adiabatic efficiency of up to 92%.
Permanent Magnet High Speed Motor (PMSM)
Motor efficiencies up to 97% or more. Rotor direct drive, no speed increasing gears, no couplings, eliminating transmission losses. Small size and great power density.
Air Foil Bearings
Patented design of wave and top foil construction with nano-scale Teflon wear-resistant coating. Start-stop test life of over 20,000 cycles, semi-permanent operating life.
Intelligent touch screen control
Each unit is equipped with PLC intelligent control system and touch screen as standard. Built-in “one key start-stop”, “constant pressure / constant current / constant speed” multiple control modes.
real time monitoring
Real-time display of flow, pressure, speed, temperature and power.
Remote IOT
Supports RS485/Ethernet communication and can be connected to the DCS in the center control room.
self-diagnostic protection
Surge warning, overheating and overload automatic shutdown protection.
frequency conversion
45%-100% Wide flow rate stepless adjustment.
简体中文 
English 
Tiếng Việt 
العربية 
ไทย